The CHASER bodykit was developed in collaboration with active drift drivers and engineered specifically for real-world drifting.
Inspired by the BMW M2 G87 and reimagined for the BMW E46 platform, it combines a modern motorsport appearance with one of the most proven drift chassis ever built.
Every detail was designed around the demands of competitive drifting — from body proportions and chase performance to durability during close-contact driving. This is not a replica kit made for shows..
it’s a purpose-built bodykit created by drifters, for drifters.
Every drifter knows that every centimeter matters.
While inspired by the BMW M2 G87, the CHASER bodykit was redesigned with drift-focused proportions. Compared to the original M2 G87, the overall length is reduced by approximately 140 mm, and it is even shorter than a stock BMW E46.
The result is a more compact package that allows drivers to stay closer during tandem runs, commit harder in chase, and reduce the risk of unwanted contact when running door-to-door.
Shorter than a G87. Shorter than a stock E46. Built for chase.
The flexibility of the CHASER bodykit is best demonstrated in the videos shown here. Unlike traditional fiberglass panels, the carbon-kevlar construction can be bent, twisted, and compressed without cracking or losing its structural integrity.
Engineered for real-world drifting, it absorbs contact and deformation while maintaining its shape. Once the load is removed, the panel returns to its original form, making it ideal for the demands of close-contact driving.
This combination of elasticity, impact resistance, and shape recovery helps reduce damage and keeps the car looking its best, even after repeated track use.
combines the stiffness of carbon fiber with the impact resistance of Kevlar, creating a lightweight composite trusted across motorsport and aerospace applications.
The result is a bodykit that is stronger, lighter, and significantly more resistant to cracking than traditional fiberglass alternatives.
We deliberately over-engineer every component. Each edge, corner, mounting point, and stress zone is individually reinforced with additional composite layers to create a structure that is significantly stronger than required.
It’s a time-consuming process, but one that delivers exceptional rigidity, improved impact resistance, and the confidence to push the car harder without compromising durability.
Designed for enthusiasts who want the best driving experience possible. Less about polishing the car, more about pushing it harder every lap.
The Competition version is approximately 50% cheaper than the premium vacuum-infused version.
The reason is not a lower-quality material, but a different manufacturing process — traditional hand lay-up lamination.
This technology is widely used in motorsport for parts that are designed primarily to perform.
The result is a more affordable carbon-kevlar body kit built for real-world racing use.
Carbon-kevlar combines the strength of carbon fiber with the flexibility and impact resistance of kevlar.
This allows the panels to perform better under contact, abrasion, and the everyday stresses of track use.
For a drift car, this is important because a body kit is not just a styling accessory, but a functional motorsport component.
The Competition version is designed for cars that are actually driven and pushed to their limits.
The Competition version is manufactured from carbon-kevlar, making the entire body kit significantly lighter than conventional fiberglass alternatives.
Reduced weight is especially important in drifting, where every kilogram matters.
Lighter panels help keep the car more responsive and practical for competitive use.
The complete kit weighs approximately 13 kg.
Each part is designed with a specific layer structure based on the loads and stresses it will experience.
Mounting points and high-stress areas are strategically reinforced for increased strength.
Areas more likely to experience contact or impact are engineered with additional flexibility to better absorb damage.
This allows the part to absorb impacts more effectively — for example when a rear fender brushes against a wall — and, in ideal situations, partially return to its original shape.
Designed for enthusiasts who want the best driving experience possible. Less about polishing the car, more about pushing it harder every lap.
The Competition version is approximately 50% cheaper than the premium vacuum-infused version.
The reason is not a lower-quality material, but a different manufacturing process — traditional hand lay-up lamination.
This technology is widely used in motorsport for parts that are designed primarily to perform.
The result is a more affordable carbon-kevlar body kit built for real-world racing use.
Carbon-kevlar combines the strength of carbon fiber with the flexibility and impact resistance of kevlar.
This allows the panels to perform better under contact, abrasion, and the everyday stresses of track use.
For a drift car, this is important because a body kit is not just a styling accessory, but a functional motorsport component.
The Competition version is designed for cars that are actually driven and pushed to their limits.
The Competition version is manufactured from carbon-kevlar, making the entire body kit significantly lighter than conventional fiberglass alternatives.
Reduced weight is especially important in drifting, where every kilogram matters.
Lighter panels help keep the car more responsive and practical for competitive use.
The complete kit weighs approximately 13 kg.
Each part is designed with a specific layer structure based on the loads and stresses it will experience.
Mounting points and high-stress areas are strategically reinforced for increased strength.
Areas more likely to experience contact or impact are engineered with additional flexibility to better absorb damage.
This allows the part to absorb impacts more effectively — for example when a rear fender brushes against a wall — and, in ideal situations, partially return to its original shape.
2340 cm
2340 cm
20 cm
2,3 Kg
We deliberately over-engineer every component. Each edge, corner, mounting point, and stress zone is individually reinforced with additional composite layers to create a structure that is significantly stronger than required.
It’s a time-consuming process, but one that delivers exceptional rigidity, improved impact resistance, and the confidence to push the car harder without compromising durability.
230 eur
460 eur

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2340 cm
2340 cm
20 cm
2,3 Kg
We deliberately over-engineer every component. Each edge, corner, mounting point, and stress zone is individually reinforced with additional composite layers to create a structure that is significantly stronger than required.
It’s a time-consuming process, but one that delivers exceptional rigidity, improved impact resistance, and the confidence to push the car harder without compromising durability.
230 eur
460 eur

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2340 cm
2340 cm
20 cm
2,3 Kg
We deliberately over-engineer every component. Each edge, corner, mounting point, and stress zone is individually reinforced with additional composite layers to create a structure that is significantly stronger than required.
It’s a time-consuming process, but one that delivers exceptional rigidity, improved impact resistance, and the confidence to push the car harder without compromising durability.
230 eur
460 eur

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2340 cm
2340 cm
20 cm
2,3 Kg
We deliberately over-engineer every component. Each edge, corner, mounting point, and stress zone is individually reinforced with additional composite layers to create a structure that is significantly stronger than required.
It’s a time-consuming process, but one that delivers exceptional rigidity, improved impact resistance, and the confidence to push the car harder without compromising durability.
230 eur
460 eur

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2340 cm
2340 cm
20 cm
2,3 Kg
We deliberately over-engineer every component. Each edge, corner, mounting point, and stress zone is individually reinforced with additional composite layers to create a structure that is significantly stronger than required.
It’s a time-consuming process, but one that delivers exceptional rigidity, improved impact resistance, and the confidence to push the car harder without compromising durability.
230 eur
460 eur

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2340 cm
2340 cm
20 cm
2,3 Kg
We deliberately over-engineer every component. Each edge, corner, mounting point, and stress zone is individually reinforced with additional composite layers to create a structure that is significantly stronger than required.
It’s a time-consuming process, but one that delivers exceptional rigidity, improved impact resistance, and the confidence to push the car harder without compromising durability.
230 eur
460 eur

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
dbasghdfjkdsfnjsd djfdsjf jksd fkjsd fjksd jfksdklj jds fhjsd jfsdhj fjhsdf hjsdfhj sdhjf
jdfhdjs fhjsdfhkj dshfj dhsjkfhkj sdkjhf jkdsf sd f